A. All features required by Section 16.02.030;

B. Streets indicating numbers and/or names and lots addressed and numbered consecutively;

C. Boundary dimensions and legal description of the subdivision and each lot therein which close within one-hundredth of one foot with point of beginning clearly labeled;

D. Location, width, centerlines bearings and curve data (including delta angle, radius, length, tangent, and the long chord on curves) and other dimensions of all existing proposed or platted streets and easements;

E. Location, width, centerlines bearings and curve data (including delta angle, radius, length, tangent, and the long chord on curves) and other dimensions of all important features such as rail lines, water lines, exceptional topography, and structures within the proposed area and within a one-hundred-foot perimeter of the subdivision. Water system features must appear on the plat;

F. Signature boxes for the following:

G. A certification by the surveyor that complies with Utah Code Annotated Section 10-9a-603(6)(b), as amended;

H. Dedication language and the date of the owner’s dedication on each sheet;

I. A note indicating the existence of institutional controls or other environmental regulations in areas where such controls or regulations, particularly Midvale’s institutional controls ordinance (Chapter 8.10), are in effect;

J. A note indicating that the plat will expire and be void if it is not recorded within one year of the date it is approved by the city;

K. A note indicating the existence of covenants, conditions, or restrictions, if any; and

L. Language conveying to the association all common areas (as those terms are defined in Utah Code Annotated Section 57-8a-102, as amended) if any part of the subdivision is to be part of a community association subject to Utah Code Title 57, Chapter 8a, Community Association Act, as amended. (Ord. 2024-01 § 1 (Att. A))